How to Install a Samsung A6 Combo for a Perfect Display

If your Samsung A6 screen is broken, replacing the combo can help. A combo includes the display and the touch sensor. This part restores both the screen and the touch. Replacing it is easier if you follow the steps below. 

Tools You Need

Gather these tools before you start: 

– Samsung A6 combo (LCD + Digitizer) 

– Plastic prying tools 

– Suction cup 

– Phillips screwdriver 

– Tweezers 

– Sim ejector pin 

– Heat gun or hairdryer 

– Adhesive strips or glue 

– Microfiber cloth for cleaning 

Ensure your workspace is spotless and well-organized. 

Step 1: Power Off and Remove the SIM Tray

Turn off your Samsung A6 before starting. This keeps you safe. Use the SIM ejector tool to remove the SIM and microSD tray. Store the tray safely. 

Step 2: Heat the Back Panel

The back of the phone is sealed with glue. To open it, apply heat. Use a heat gun or hairdryer for about three minutes. Hold it a few inches away to prevent damage. 

Step 3: Pry Open the Back Panel

Once heated, use the suction cup to lift the back panel. Slip a plastic prying tool under the panel and slide it around. Be careful not to crack the glass. Avoid metal tools to prevent scratches. 

Step 4: Disconnect the Battery

After the back panel is off, disconnect the battery. This prevents any electrical shorts. Gently use a plastic tool to disconnect the battery. 

Step 5: Remove the Broken Display

Warm the front edges of the phone for a few minutes. Heat softens the glue holding the display. Insert the prying tool into the edge and lift the screen carefully. Don’t rush. Carefully disconnect the display cables from the motherboard. 

Step 6: Clean the Frame

Clean the frame before installing the new screen. Remove all the old glue. A clean frame ensures a good fit for the new combo. Use a microfiber cloth to remove any dust or dirt. 

Step 7: Install the New Combo

Connect the new screen cable to the motherboard. Align the new screen with the phone’s frame. Apply new adhesive to the edges. Press the screen down evenly so it fits securely. 

Step 8: Reconnect the Battery

Reconnect the battery to the motherboard. Make sure the connection is secure. This will allow your phone to power on with the new screen. 

Step 9: Reassemble the Phone

Place the back panel on the phone. Heat the edges again and press it down. If the glue is not sticky enough, use new adhesive strips. 

Step 10: Test the New Screen

Turn on your Samsung A6 to test the new screen. Check the touch response. Make sure the screen works without lag or color issues. If everything looks good, you have successfully replaced your Samsung A6 combo. 

Availability in other Countries

1. United States

Availability: Available through Amazon, eBay, and local electronic repair shops. Authorized Samsung repair centers also stock the parts. 

Price: Around $50 to $80 depending on the vendor and quality (OEM or third-party). 

2. India

Availability: Widely available via e-commerce platforms like Flipkart, Amazon India, and local mobile repair shops. Samsung service centers also stock the part. 

Price: Ranges from ₹3,000 to ₹4,500 (approximately $36 to $55). 

3. United Kingdom

Availability: Available on online platforms like Amazon UK, eBay, and mobile part retailers. Local Samsung service centers also carry the part. 

Price: Priced between £40 and £60 (approximately $50 to $75). 

Final Thoughts

Replacing the combo is a simple process if you follow these steps. Always take your time, and use the right tools for a clean repair. 

Samsung A6 Combo
Author: